{"id":26244,"date":"2019-04-16T11:52:38","date_gmt":"2019-04-16T15:52:38","guid":{"rendered":"https:\/\/blogarchive.utc.edu\/news\/?p=26244"},"modified":"2019-05-30T11:40:48","modified_gmt":"2019-05-30T15:40:48","slug":"robot-team-engineers-a-top-3-finish-in-competition","status":"publish","type":"post","link":"https:\/\/blogarchive.utc.edu\/news\/2019\/04\/robot-team-engineers-a-top-3-finish-in-competition\/","title":{"rendered":"Robot team engineers a Top 3 finish in competition"},"content":{"rendered":"
\"\"

Robot team is, from left, Shane Taylor, Daniel Loveless, Abdul Ofoli, Anthony Maxwell, Artem Malashiy and Robert Rhodes.<\/p><\/div>\n

 <\/p>\n

A robot built and run by a team from the College of Engineering and Computer Science placed third out of 44 teams in a regional robotics contest.<\/p>\n

The four-member team from UTC competed in the SoutheastCon Robotics Hardware Competition, held last week in Huntsville, Alabama.<\/p>\n

The electrical engineering students\u2014\u00a0Anthony Maxwell,\u00a0Artem Malashiy,\u00a0Shane Taylor,\u00a0\u00a0Robert Rhodes\u2014built the prototype for the robot in December, finetuning its design about four times before finishing the final model that was used in the competition. They named it Scrappy Bot.<\/p>\n

\u201cOur robot was the talk of the tournament and by far the favorite of the fans from the 44 college teams that participated,\u201d said Abdul R. Ofoli, UC Foundation associate professor of electrical engineering. \u201cI am very proud of this team and what they have accomplished.\u201d<\/p>\n

In the competition, teams were instructed to build \u201can autonomous debris removal bot\u201d to clear space junk from Earth\u2019s atmosphere, making sure spacecraft would not hit it and cause a possibly catastrophic and fatal event.<\/p>\n

Robots were placed in a \u201cbox\u201d that measured 108 inches on all sides with an \u201corbit circle\u201d drawn inside that was divided into four quadrants, each containing balls and blocks. Corners of the box had square drawn in them, the starting spot for the robots. The goal was to push as many of the balls and blocks into the corner squares or outside the orbit circle within three minutes.<\/p>\n

\u201cWe were the team to beat, but during the semifinals when making a turn, our robot made contact with the opponents\u2019 bot and could not turn fully which made it got stuck,\u201d Ofoli says. \u201cIt cost us the chance to compete for the top spot, but we won the third-place runoff.\u201d<\/p>\n

 <\/p>\n